Инструкция на aspire 5541

инструкция на aspire 5541
Remove screws and remove both covers. STEP 2. In order to disconnect the hard drive from the motherboard, slide it to the shown direction. Can’t find your answer ? Ask ! You have a black screen on the laptop, and on the TV, do you see something? I’ll tell you because I just did this. I had to «reflow» the GPU because the heatsink that Acer used on the Graphics Processor sucks. Solved Last response: in Laptop General Discussion Hi my acer aspire 5551 just has a black screen and nothing can be done. It powers up but nothing appears on the screen at all. I’ve tried removing the ram and just putting one in at a time but still the same. Memory used: PC2-5300 DDR2-667 200pin SDRAM SODIMM. STEP 5. There is only one screw securing the DVD drive. Acer Empowering Technology Designed to make it easy for you to access frequently used functions, Acer’s innovative Empowering Technology is a simple and easy-to-use portal for managing your Acer IT products. There are no screws securing the keyboard at all. STEP 7. Carefully lift up the power button cover with a sharp object as it shown on the following picture.

By IML Tech | posted in: 1. Acer | 33 In this guide I’ll be taking apart an Acer Aspire 5517 laptop. Award BIOS IDs are used to identify motherboards with an Award BIOS. For more information visit our Award BIOS ID information page. At this moment we have 6 Award BIOS IDs listed for Acer. After both antenna cable disconnected, you remove two screws securing the wireless card and pull the wireless card from the slot. REMOVING AND REPLACING THE KEYBOARD. If you would like to remove and replace the keyboard, you don’t have to go though all previous steps. Maybe the rotation of the screens, will give you the laptop screen. Hi tried that and no joy.

Service & Support | Acer Official Site in Products in Support in Press in Support in Supportin Answers in answersin Discussions in discussions. This happened when it was connected to the TV by him. I accidently closed the lid while it was still on and when I opened it up it was just a black screen. There is a gap between the processor and the heatsink *no direct contact.So to fix this, you will have to strip the entire laptop down to the bare motherboard. I mean everything has to come off.

Похожие записи: